 Extruded graphite plate, 1"H x 24"W x 24"L (Graphtek LLC)
Key features Graphtek LLC
- High degree of heat: 750 °F in broadcast, 5,000 °F indifferent
- Good electrical power of transmission propagation: 3 ohm/inx10 -4
- Low CTE: 1.4 in/in °F x 10 -6
- High flexural lustiness: 2,400 psi
- Excellent chemic opposition
Extruded graphite plateful recommended concerning glaze molds, welding plugs and back-up plates, lubrication blocks, anodes, electrodes, sintering trays, etc. This mathematical product is unannealed.
 Isomolded graphite plate, 0.5"H x 12"W x 12"L (Graphtek LLC)
Key features Graphtek LLC
- Particle sizing: 0.0004 in
- Density: 1.82 gr/cm 3
- Compressive Strength: 18,500 psi
- Porosity: 8%
- Isotropic complex body part
Isomolded, first-rate metric grain, high-pitched nervous diction and denseness graphite. Recommended according to mulct elaborated glaze molds, brazing tips, sintering trays, glass-to-metal fixtures, etc. Tolerances: strand goal, heaviness +/- 0.001"; fulness & Width +/- 0.005".
 Isomolded graphite plate, 0.25"H x 12"W x 12"L (Graphtek LLC)
Key features Graphtek LLC
- Particle sizing: 0.0004 in
- Density: 1.82 gr/cm 3
- Compressive Strength: 18,500 psi
- Porosity: 8%
- Isotropic complex body part
Isomolded, first-rate metric grain, high-pitched hardness and denseness graphite. Recommended since amercement elaborate glaze molds, brazing tips, sintering trays, glass-to-metal fixtures, etc. Tolerances: strand destination, heaviness +/- 0.001"; long duration & Width +/- 0.005".
 Extruded graphite plate, 1"H x 12"W x 12"L (Graphtek LLC)
Key features Graphtek LLC
- High degree of heat: 750 °F in beam, 5,000 °F indifferent
- Good electrical power of transmission propagation: 3 ohm/inx10 -4
- Low CTE: 1.4 in/in °F x 10 -6
- High flexural impetuosity: 2,400 psi
- Excellent chemic opposition
Extruded graphite plateful recommended against glaze molds, welding plugs and back-up plates, lubrication blocks, anodes, electrodes, sintering trays, etc. This mathematical product is unannealed.
 Isomolded graphite plate, 0.125"H x 12"W x 12"L (Graphtek LLC)
Key features Graphtek LLC
- Particle sizing: 0.0004 in
- Density: 1.82 gr/cm 3
- Compressive Strength: 18,500 psi
- Porosity: 8%
- Isotropic body structure
Isomolded, the best metric grain, high-pitched armament and denseness graphite. Recommended toward amercement elaborated glaze molds, brazing tips, sintering trays, glass-to-metal fixtures, etc. Tolerances: strand destination, heaviness +/- 0.001"; long duration & Width +/- 0.005".
 Extruded graphite plate, 0.5"H x 12"W x 12"L (Graphtek LLC)
Key features Graphtek LLC
- High degree of heat: 750 °F in beam, 5,000 °F indifferent
- Good electrical power of transmission propagation: 3 ohm/inx10 -4
- Low CTE: 1.4 in/in °F x 10 -6
- High flexural soundness: 2,400 psi
- Excellent chemic opposition
Extruded graphite plateful recommended in spite of glaze molds, welding plugs and back-up plates, lubrication blocks, anodes, electrodes, sintering trays, etc. This mathematical product is unannealed.
 Isomolded graphite plate, 0.5"H x 6"W x 6"L (Graphtek LLC)
Key features Graphtek LLC
- Particle sizing: 0.0004 in
- Density: 1.82 gr/cm 3
- Compressive Strength: 18,500 psi
- Porosity: 8%
- Isotropic anatomical structure
Isomolded, the best metric grain, high-pitched support and denseness graphite. Recommended during amercement elaborated glaze molds, brazing tips, sintering trays, glass-to-metal fixtures, etc. Tolerances: run aground destination, heaviness +/- 0.001"; longitudinal dimensions & Width +/- 0.005".
 Slide-N-Glide automotive graphite lubricant (Asbury)
Key features Asbury
- Natural Flake Graphite
- Solids mental object: 54.5%
- Carrier: inorganic body distilled liquors
- Consistency: runny
- Density: 8.3 lb/gal
Slide N Glide is a various graphite juiceless take lubricant formulated to work out a broad change of of the products of labor lubrication problems. It is long-wearing, endure and erosion resistan; testament non break up up ungraded, dust or gritrock; idealistic in favor of hard environments at what place lubricating oil is non an alternative; really resistant to subsiding, easy remixed; formulated according to non-Hazardous Air Pollutant dissolver. Slide N Glide may be applied by sweep or spraying. Remix previous to habituate. Remove dust and ungraded from rise already applying. Ideal applications: gondola toter trailers, agricultural gear, for labor apparatus.
 Isomolded graphite plate, 0.25"H x 6"W x 6"L (Graphtek LLC)
Key features Graphtek LLC
- Particle sizing: 0.0004 in
- Density: 1.82 gr/cm 3
- Compressive Strength: 18,500 psi
- Porosity: 8%
- Isotropic body structure
Isomolded, superior metric grain, high-pitched lustiness and denseness graphite. Recommended in favor of mulct elaborate glaze molds, brazing tips, sintering trays, glass-to-metal fixtures, etc. Tolerances: run aground destination, heaviness +/- 0.001"; longitudinal dimensions & Width +/- 0.005".
 Extruded graphite plate, 0.5"H x 6"W x 6"L (Graphtek LLC)
Key features Graphtek LLC
- High degree of heat: 750 °F in send, 5,000 °F indifferent
- Good electrical power of transmission propagation: 3 ohm/inx10 -4
- Low CTE: 1.4 in/in °F x 10 -6
- High flexural validity: 2,400 psi
- Excellent chemic opposition
Extruded graphite plateful recommended beneficial to glaze molds, welding plugs and back-up plates, lubrication blocks, anodes, electrodes, sintering trays, etc. This mathematical product is unannealed.
|